MIL-DTL-83733 and DPKA / DPKB Connector Backshells

MIL-DTL-83733 and DPKA / DPKB Connector Backshells

Cable Strain Relief and EMI/RFI Shield Termination Backshells for M83733 / DPK Connectors

MIL-C-83733 connectors are utilized in military aircraft applications and are subject to severe electrical, environmental, and mechanical stress. The cable side of these rack-and-panel connectors must be equipped with strain relief or cable shield termination backshells in accordance with DLA specifications. Glenair’s split-shell backshells for MIL-C-83733 connectors are available in three designs which offer either a standard cable clamp, saddle-bar style strain-relief, or an EMI shield banding platform. Tongue-and-groove joints in the split-shell designs provide optimal electromagnetic compatibility. Backshells may be ordered with up to six cable entry locations for complete flexibility in wire and cable routing.

Reference

Rectangular > G > MIL-DTL-83733 and DPKA / DPKB

Strain Relief, Straight Clamp, M83733, 507-013

507-013
Strain Relief, Straight Clamp, M83733

Fits ITT Cannon DPK and MIL-DTL-83733 connectors. Saddle bars have cushions to prevent damage to wire insulation.

Aluminum with stainless steel hardware, fluorosilicone cushions.

  • M83733 / DPK Backshells
Backshell, EMI Cone-and-Ring, M83733, 501-001

501-001
Backshell, EMI Cone-and-Ring, M83733

Fits ITT Cannon DPK and MIL-DTL-83733 connectors. Available with 1­–3 ports located on top, ends or sides. Cone-and-ring shield termination.

Aluminum with stainless steel hardware.

  • M83733 / DPK Backshells
Backshell, EMI Banding, M83733, 507-078

507-078
Backshell, EMI Banding, M83733

Fits ITT Cannon DPK and MIL-DTL-83733 connectors. Available with 1­–3 ports located on top, end or side. Attach cable braid to backshell with Band-Master ATS® banding strap. Backshell is supplied with three EMI gaskets: entry gasket, backshell/connector interface and connector/panel interface.

Aluminum with stainless steel hardware. Backshell gaskets: metalastic.

Connector interface gasket: monel mesh.

  • M83733 / DPK Backshells
Backshell, EMI Banding, Top Entry, M83733, 507-158

507-158
Backshell, EMI Banding, Top Entry, M83733

Fits ITT Cannon DPK and MIL-DTL-83733 connectors. Elliptical top entry accepts large wire bundles. Attach cable braid to backshell with Band-Master ATS® banding strap. Attach cable tie (not supplied) to optional Qwik-Ty arm for cable strain relief. Backshell is supplied with three EMI gaskets: entry gasket, backshell/connector interface and connector/panel interface.

Aluminum with stainless steel hardware. Backshell gaskets: metalastic.

Connector interface gasket: monel mesh.

  • Elliptical Top Entry
  • Band-Master ATS Shield Termination
  • M83733 / DPK Backshells
Backshell, EMI Banding, End Entry, DPKB, 527-466

527-466
Backshell, EMI Banding, End Entry, DPKB

Fits ITT Cannon DPKB and MIL-DTL-83733 shell size B connectors. Elliptical end entry accepts large wire bundles. Attach cable braid to backshell with Band-Master ATS® banding strap. Attach cable tie (not supplied) to optional Qwik-Ty arm for cable strain relief.

Aluminum with stainless steel hardware.

  • Elliptical End Entry
  • Band-Master ATS Shield Termination
  • M83733 / DPK Backshells