DPX and AS81969 Connector Backshells and Strain Reliefs

DPX and AS81969 Connector Backshells and Strain Reliefs

Complete DPX / AS81659 Backshell Capability: Solid, Split-Shell, Environmental, Non-Environmental, EMI/RFI, Strain Relief and More

Line Replaceable Units (LRUs) are incorporated into avionic racks in commercial and military aircraft. Installation and maintenance of avionic equipment is facilitated through the use of rack-and-panel connectors which mate and demate without the use of mechanical coupling. On the cable side, these rack-and-panel connectors are equipped with backshell accessories to address common environmental, electrical, and mechanical stress problems which can damage cables and cable-to-connector terminations. Glenair supplies the complete range of DPX / AS81659 (ARINC 404) connector accessories and backshells for cable strain relief, environmental sealing, and EMI/RFI shield termination.

Reference

Rectangular > F > DPX and AS81969

Backshell, AS81659, Split, Saddle Clamp, 507-001

507-001
Backshell, AS81659, Split, Saddle Clamp

Saddle clamp strain relief. Aluminum with stainless steel hardware.

  • For unshielded wire bundles
  • DPX / AS81659 Rectangular Connector Accessories
Qwik-Ty, AS81659, 507-002

507-002
Qwik-Ty, AS81659

Black anodized aluminum with stainless steel hardware.

  • DPX / AS81659 Rectangular Connector Accessories
Saddle Clamp Strain Relief, AS81659, 507-249

507-249
Saddle Clamp Strain Relief, AS81659

Available in three mounting styles. Aluminum with stainless steel screws and washers. Captivated nut is silver-plated SST.

  • DPX / AS81659 Rectangular Connector Accessories
Backshell, EMI Banding, AS81659, 507-011

507-011
Backshell, EMI Banding, AS81659

Available with one or two ports. Terminate cable braid shield to backshell with Band-Master ATS® banding strap. Backshell includes RFI gasket and four #2-56 mounting screws and lockwashers.

Aluminum with stainless steel hardware and aluminum mesh/neoprene gasket.

  • DPX / AS81659 Rectangular Connector Accessories
Backshell, EMI TAG Ring®, AS81659, 507-059

507-059
Backshell, EMI TAG Ring®, AS81659

Backshell has slotted ring, gold-plated ground spring and PTFE friction washer for terminating individual wire shields. Two strain relief options: saddle clamp or nut. Nut requires shrink boot for cable strain relief.

Aluminum with stainless steel hardware. Gold-plated beryllium copper ground spring, Teflon friction washer.

  • DPX / AS81659 Rectangular Connector Accessories
Backshell, EMI, AS81659, M25 Thread, 507-117

507-117
Backshell, EMI, AS81659, M25 Thread

Backshell has M25 thread and interface teeth compatible with Adapter Code H (D38999 Series III/IV) size 17 fittings.

Aluminum with stainless steel hardware.

  • DPX / AS81659 Rectangular Connector Accessories
Backshell, EMI Cone-and-Ring, AS81659, 527-083

527-083
Backshell, EMI Cone-and-Ring, AS81659

Cone-and-ring shield termination.

Aluminum with stainless steel hardware, gasket is aluminum mesh embedded in neoprene.

  • DPX / AS81659 Rectangular Connector Accessories
Backshell, EMI Banding, AS81659/ DPXB, 527-476

527-476
Backshell, EMI Banding, AS81659/ DPXB

Lightweight composite material. Terminate cable braid shield to backshell with Band-Master ATS® banding strap. Options include slots for individual wire shields and Qwik-Ty arm.

Thermoplastic with stainless steel hardware and aluminum mesh/neoprene gasket.

  • Composite Split
  • Band-Master ATS Shield Termination
  • DPX / AS81659 Rectangular Connector Accessories
Backshell, EMI TAG Ring, DPX2, 527-070

527-070
Backshell, EMI TAG Ring, DPX2

Fits ITT Cannon DPX2 connectors. Backshell has slotted ring, gold-plated ground spring and Teflon friction washer for terminating individual wire shields. Two strain relief options: saddle clamp or nut (nut requires shrink boot for cable strain relief).

Aluminum with stainless steel hardware. Gold-plated beryllium copper ground spring, Teflon friction washer.

  • DPX / AS81659 Rectangular Connector Accessories
Backshell, EMI TAG Ring, DPX4, 527-142

527-142
Backshell, EMI TAG Ring, DPX4

Fits ITT Cannon DPX4 connectors. Backshell has slotted ring, gold-plated ground spring and PTFE friction washer for terminating individual wire shields. Two strain relief options: saddle clamp or nut (nut requires shrink boot for cable strain relief).

Aluminum with stainless steel hardware. Gold-plated beryllium copper ground spring, PTFE friction washer.

  • DPX / AS81659 Rectangular Connector Accessories